Gardner 7545-GA Manuál s instrukcemi stáhnout pdf (Strana 4)

 Mix the end of one pail with the beginning of the

next pail to prevent color shading between

batches.

 Complete the entire driveway in one continuous

application to prevent “color shading.”

 Apply at correct temperature to avoid curing

problems. Temperature must be 65 F and rising,

but not exceeding 90 F. Humid or cloudy

conditions may prolong curing time. Products in

shaded areas generally dry more slowly than in

sunny areas.



For flat driveways only.

Our driveway sealers are

not recommended or warranted for use on

surfaces which contain a slope greater than 20

degrees (see diagram below.)

 For steep sloped areas (10-20°) you can apply 1

lb. of sand per gallon to improve traction.

Step 3: Apply Driveway Sealer, continued

Max

Coverage

Rates:

Approximately 350 square feet / 5 gallon pail.

Two coats recommended. Follow label

directions. Do not allow to puddle or pond.

Recommended

Applicator:

Driveway Brush w/squeegee

Walking/Driving

on Driveways:

Do not walk on driveway for at least 8 hours after

the last coat. Vehicles should not be allowed for

24-48 hours. See label directions for specific

information.

Not for steep slopes

Use at 65°F or

warmer

How to seal an asphalt / blacktop driveway

1 2 3 4

Žádné komentáře

Gardner 7545-GA Manuál s instrukcemi Strana 4